2003 - 2021
KTM 450 XC-F
Mėlyno aliuminio galinė žvaigždutė - 50 dantų (520 žingsnių)
| MOOSE RACING
MOOSE RACING
Tinka:
KTM XC-F 450 [2008 - 2017]
KTM XC-F 450 I [2010 - 2021]
KTM XC-W 450 [2007 - 2016]
KTM XC-W 450 Sixdays [2010 - 2012]
KTM XC-W 450 Champions Edition [2010 - 2010]
KTM XC 450 [2004 - 2007]
KTM XCR-W 450 [2008 - 2008]
KTM MXC 450 RACING [2003 - 2006]
2016 - 2020 KTM 450 XC-F
Perdavimo santykis:
| 11 | 12 | 13 | 14 | 15 | 16 | ||
| 38 | 3.45 -6.4% | 3.17 -14.2% | 2.92 -20.8% | 2.71 -26.5% | 2.53 -31.4% | 2.38 -35.7% | |
| 40 | 3.64 -1.5% | 3.33 -9.7% | 3.08 -16.7% | 2.86 -22.6% | 2.67 -27.8% | 2.50 -32.3% | |
| 41 | 3.73 +0.9% | 3.42 -7.5% | 3.15 -14.6% | 2.93 -20.7% | 2.73 -26.0% | 2.56 -30.6% | |
| 42 | 3.82 +3.4% | 3.50 -5.2% | 3.23 -12.5% | 3.00 -18.8% | 2.80 -24.2% | 2.62 -28.9% | |
| 44 | 4.00 +8.3% | 3.67 -0.7% | 3.38 -8.3% | 3.14 -14.9% | 2.93 -20.6% | 2.75 -25.5% | |
| 45 | 4.09 +10.8% | 3.75 +1.6% | 3.46 -6.2% | 3.21 -12.9% | 3.00 -18.8% | 2.81 -23.8% | |
| 46 | 4.18 +13.3% | 3.83 +3.8% | 3.54 -4.2% | 3.29 -11.0% | 3.07 -16.9% | 2.88 -22.1% | |
| 47 | 4.27 +15.7% | 3.92 +6.1% | 3.62 -2.1% | 3.36 -9.1% | 3.13 -15.1% | 2.94 -20.4% | |
| 48 | 4.36 +18.2% | 4.00 +8.3% | 3.69 standard | 3.43 -7.1% | 3.20 -13.3% | 3.00 -18.8% | |
| 49 | 4.45 +20.6% | 4.08 +10.6% | 3.77 +2.1% | 3.50 -5.2% | 3.27 -11.5% | 3.06 -17.1% | |
| 50 | 4.55 +23.1% | 4.17 +12.8% | 3.85 +4.2% | 3.57 -3.3% | 3.33 -9.7% | 3.12 -15.4% | |
| 51 | 4.64 +25.6% | 4.25 +15.1% | 3.92 +6.2% | 3.64 -1.3% | 3.40 -7.9% | 3.19 -13.7% | |
| 52 | 4.73 +28.0% | 4.33 +17.4% | 4.00 +8.3% | 3.71 +0.6% | 3.47 -6.1% | 3.25 -12.0% | |
| 53 | 4.82 +30.5% | 4.42 +19.6% | 4.08 +10.4% | 3.79 +2.5% | 3.53 -4.3% | 3.31 -10.3% | |
Specifikacijos
| Gamintojas | MOOSE RACING |
|---|---|
| Grandinės žingsnis | 520 |
| Spalva | Blue |
| Medžiaga | Aluminum |
| Padėtis | Rear |
| Tipas | Drive |
| Vienetai | Each |
| Dantų skaičius | 50 |
Produkto aprašymas
The 7075 T651 aluminum we use for these sprockets receives an extra tempering which reduces distortion and provides optimal thickness vs. typically thinner 7075 T6 sprockets 100% machined, no stamping or grinding Optimal tooth thickness results in maximum tooth and chain contact