1993 - 2011
KTM 400 EXC
Aliuminio oranžinė galinė žvaigždutė - 54 dantys
| MOOSE RACING
MOOSE RACING
Tinka:
KTM EXC-G 400 RACING [2002 - 2006]
KTM EXC 400 [2009 - 2011]
KTM EXC 400 RACING [1999 - 2007]
KTM EXC 400 LC4 Super Competition [1995 - 1998]
KTM EXC 400 LC4 Competition Sixdays [1993 - 1997]
KTM EXC 400 LC4 Competition [1993 - 1996]
KTM EXC 400 [2000 - 2003]
2003 - 2007 KTM 400 EXC
Perdavimo santykis:
| 11 | 12 | 13 | 14 | 15 | 16 | ||
| 38 | 3.45 +15.2% | 3.17 +5.6% | 2.92 -2.6% | 2.71 -9.5% | 2.53 -15.6% | 2.38 -20.8% | |
| 40 | 3.64 +21.2% | 3.33 +11.1% | 3.08 +2.6% | 2.86 -4.8% | 2.67 -11.1% | 2.50 -16.7% | |
| 41 | 3.73 +24.2% | 3.42 +13.9% | 3.15 +5.1% | 2.93 -2.4% | 2.73 -8.9% | 2.56 -14.6% | |
| 42 | 3.82 +27.3% | 3.50 +16.7% | 3.23 +7.7% | 3.00 standard | 2.80 -6.7% | 2.62 -12.5% | |
| 44 | 4.00 +33.3% | 3.67 +22.2% | 3.38 +12.8% | 3.14 +4.8% | 2.93 -2.2% | 2.75 -8.3% | |
| 45 | 4.09 +36.4% | 3.75 +25.0% | 3.46 +15.4% | 3.21 +7.1% | 3.00 standard | 2.81 -6.2% | |
| 46 | 4.18 +39.4% | 3.83 +27.8% | 3.54 +17.9% | 3.29 +9.5% | 3.07 +2.2% | 2.88 -4.2% | |
| 47 | 4.27 +42.4% | 3.92 +30.6% | 3.62 +20.5% | 3.36 +11.9% | 3.13 +4.4% | 2.94 -2.1% | |
| 48 | 4.36 +45.5% | 4.00 +33.3% | 3.69 +23.1% | 3.43 +14.3% | 3.20 +6.7% | 3.00 standard | |
| 49 | 4.45 +48.5% | 4.08 +36.1% | 3.77 +25.6% | 3.50 +16.7% | 3.27 +8.9% | 3.06 +2.1% | |
| 50 | 4.55 +51.5% | 4.17 +38.9% | 3.85 +28.2% | 3.57 +19.0% | 3.33 +11.1% | 3.12 +4.2% | |
| 51 | 4.64 +54.5% | 4.25 +41.7% | 3.92 +30.8% | 3.64 +21.4% | 3.40 +13.3% | 3.19 +6.2% | |
| 52 | 4.73 +57.6% | 4.33 +44.4% | 4.00 +33.3% | 3.71 +23.8% | 3.47 +15.6% | 3.25 +8.3% | |
| 53 | 4.82 +60.6% | 4.42 +47.2% | 4.08 +35.9% | 3.79 +26.2% | 3.53 +17.8% | 3.31 +10.4% | |
Specifikacijos
| Gamintojas | MOOSE RACING |
|---|---|
| Grandinės žingsnis | 520 |
| Spalva | Orange |
| Medžiaga | Aluminum |
| Padėtis | Rear |
| Dantų skaičius | 54 |
| Tipas | Drive |
| Vienetai | Each |
Produkto aprašymas
The 7075 T651 aluminum we use for these sprockets receives an extra tempering which reduces distortion and provides optimal thickness vs. typically thinner 7075 T6 sprockets 100% machined, no stamping or grinding Optimal tooth thickness results in maximum tooth and chain contact